The use of high air fall prevention equipment should pay attention to the next small series to introduce you! The surface of the metal parts should be smooth and clean, without pitting and cracking, and after 48 hours of salt spray test. Accessories are forged and stamped without welding.

Note the following when using high air fall protection equipment:

1. Each time you use the safety belt, you should check the label and certificate, check whether the nylon has no cracks, whether the stitching is secure, whether the metal parts are missing, cracks and rust, and the safety rope should be hung on the connecting ring.

2. The safety belt should be hung high and used low, and prevent swing and collision, avoid sharp substances, and do not touch open flames.

3. The hook and ring of the safety belt should be firmly hung on the tether point during operation.

4. When using the seat belt in a low temperature environment, pay attention to prevent the seat belt from hardening and cracking.

5. The use of frequent safety ropes should be inspected frequently, and the new ropes should be replaced in time when abnormalities occur, and pay attention to the problem of adding ropes.

6. The safety belt can not be used to tie the knot, so as not to disconnect the safety rope from the knot when the impact occurs. The safety hook should be hung on the connection ring, and cannot be directly hung on the safety rope, so as to avoid the safety rope being cut off when the fall occurs.

These are the precautions for the use of high air fall prevention equipment. If you have any questions, please consult Xiaobian!